Description
This is a simple three part leg for each corner of a hard board used as a monitor stand or any other kind of stand.
User assembly required
Can be supplied with timber or without (option). Timber is dressed pine board (235 x 300 x 19mm) and will be supplied raw. The size can be changed on request, email us to discuss price differences.
Can be supplied with legs attached to timber when supplied (option)
The top piece has holes for three 6G screws (I use 6Gx18mm Pan head). Screws could be omitted and glue used if preferred.
The bottom is there to close the cylinder nicely. The extension or middle pieces can be stack in between the top and foot pieces to adjust to the height you need. The bottom can connect directly into the top is only a short lift is required.
The change in eight is as follows.
Top piece = 30mm
Each extension piece = 30mm
Foot piece = 7mm
There is a spacer gauge included. This was just to keep the distance to the edge of the board consistent.
I recommend printing in PETG, but would be suitable in PC Blend or PLA.
Self printable parts can also be sources from https://www.printables.com/@David3DOMEngin_14309
Reviews
There are no reviews yet.